Решил сделать возможность подключаться к серверу с телефонов, но возникла проблема. В консоли выдает что все нормально, гейсер успешно запущен, но на деле с телефона не заходит ( пишет не удалось подключиться к миру ). Конфиг Гейсера и Велосити прикреплю ниже.
# --------------------------------
# Geyser Configuration File
#
# A bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition.
#
# GitHub:
# Discord:
# Wiki:
#
# NOTICE: See
# In most cases, especially with server hosting providers, further hosting-specific configuration is required.
# --------------------------------
bedrock:
# The IP address that will listen for connections.
# Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
address: 0.0.0.0
# The port that will listen for connections
port: 25645
# Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
# This option makes the Bedrock port the same as the Java port every time you start the server.
# This option is for the plugin version only.
clone-remote-port: false
# The MOTD that will be broadcasted to Minecraft: Bedrock Edition clients. This is irrelevant if "passthrough-motd" is set to true
# If either of these are empty, the respective string will default to "Geyser"
motd1: "Geyser"
motd2: "Another Geyser server."
# The Server Name that will be sent to Minecraft: Bedrock Edition clients. This is visible in both the pause menu and the settings menu.
server-name: "Geyser"
# How much to compress network traffic to the Bedrock client. The higher the number, the more CPU usage used, but
# the smaller the bandwidth used. Does not have any effect below -1 or above 9. Set to -1 to disable.
compression-level: 6
# The port to broadcast to Bedrock clients with the MOTD that they should use to connect to the server.
# DO NOT uncomment and change this unless Geyser runs on a different internal port than the one that is used to connect.
# broadcast-port: 19132
# Whether to enable PROXY protocol or not for clients. You DO NOT WANT this feature unless you run UDP reverse proxy
# in front of your Geyser instance.
enable-proxy-protocol: false
# A list of allowed PROXY protocol speaking proxy IP addresses/subnets. Only effective when "enable-proxy-protocol" is enabled, and
# should really only be used when you are not able to use a proper firewall (usually true with shared hosting providers etc.).
# Keeping this list empty means there is no IP address whitelist.
# IP addresses, subnets, and links to plain text files are supported.
#proxy-protocol-whitelisted-ips: [ "127.0.0.1", "172.18.0.0/16", "
remote:
# The IP address of the remote (Java Edition) server
# If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
# for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
# Leave as "auto" if floodgate is installed.
address: auto
# The port of the remote (Java Edition) server
# For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
port: 25625
# Authentication type. Can be offline, online, or floodgate (see
# For plugin versions, it's recommended to keep the `address` field to "auto" so Floodgate support is automatically configured.
# If Floodgate is installed and `address:` is set to "auto", then "auth-type: floodgate" will automatically be used.
auth-type: offline
# Allow for password-based authentication methods through Geyser. Only useful in online mode.
# If this is false, users must authenticate to Microsoft using a code provided by Geyser on their desktop.
allow-password-authentication: true
# Whether to enable PROXY protocol or not while connecting to the server.
# This is useful only when:
# 1) Your server supports PROXY protocol (it probably doesn't)
# 2) You run Velocity or BungeeCord with the option enabled in the proxy's main config.
# IF YOU DON'T KNOW WHAT THIS IS, DON'T TOUCH IT!
use-proxy-protocol: false
# Forward the hostname that the Bedrock client used to connect over to the Java server
# This is designed to be used for forced hosts on proxies
forward-hostname: false
# Floodgate uses encryption to ensure use from authorised sources.
# This should point to the public key generated by Floodgate (BungeeCord, Spigot or Velocity)
# You can ignore this when not using Floodgate.
# If you're using a plugin version of Floodgate on the same server, the key will automatically be picked up from Floodgate.
floodgate-key-file: key.pem
# For online mode authentication type only.
# Stores a list of Bedrock players that should have their Java Edition account saved after login.
# This saves a token that can be reused to authenticate the player later. This does not save emails or passwords,
# but you should still be cautious when adding to this list and giving others access to this Geyser instance's files.
# Removing a name from this list will delete its cached login information on the next Geyser startup.
# The file that tokens will be saved in is in the same folder as this config, named "saved-refresh-tokens.json".
saved-user-logins:
- ThisExampleUsernameShouldBeLongEnoughToNeverBeAnXboxUsername
- ThisOtherExampleUsernameShouldAlsoBeLongEnough
# Specify how many seconds to wait while user authorizes Geyser to access their Microsoft account.
# User is allowed to disconnect from the server during this period.
pending-authentication-timeout: 120
# Bedrock clients can freeze when opening up the command prompt for the first time if given a lot of commands.
# Disabling this will prevent command suggestions from being sent and solve freezing for Bedrock clients.
command-suggestions: true
# The following three options enable "ping passthrough" - the MOTD, player count and/or protocol name gets retrieved from the Java server.
# Relay the MOTD from the remote server to Bedrock players.
passthrough-motd: true
# Relay the player count and max players from the remote server to Bedrock players.
passthrough-player-counts: true
# Enable LEGACY ping passthrough. There is no need to enable this unless your MOTD or player count does not appear properly.
# This option does nothing on standalone.
legacy-ping-passthrough: false
# How often to ping the remote server, in seconds. Only relevant for standalone or legacy ping passthrough.
# Increase if you are getting BrokenPipe errors.
ping-passthrough-interval: 3
# Whether to forward player ping to the server. While enabling this will allow Bedrock players to have more accurate
# ping, it may also cause players to time out more easily.
forward-player-ping: false
# Maximum amount of players that can connect. This is only visual at this time and does not actually limit player count.
max-players: 100
# If debug messages should be sent through console
debug-mode: false
# Allow third party capes to be visible. Currently allowing:
# OptiFine capes, LabyMod capes, 5Zig capes and MinecraftCapes
allow-third-party-capes: false
# Allow third party deadmau5 ears to be visible. Currently allowing:
# MinecraftCapes
allow-third-party-ears: false
# Allow a fake cooldown indicator to be sent. Bedrock players otherwise do not see a cooldown as they still use 1.8 combat.
# Please note: if the cooldown is enabled, some users may see a black box during the cooldown sequence, like below:
#
# This can be disabled by going into Bedrock settings under the accessibility tab and setting "Text Background Opacity" to 0
# This setting can be set to "title", "actionbar" or "false"
show-cooldown: title
# Controls if coordinates are shown to players.
show-coordinates: true
# Whether Bedrock players are blocked from performing their scaffolding-style bridging.
disable-bedrock-scaffolding: false
# If set, when a Bedrock player performs any emote, it will swap the offhand and mainhand items, just like the Java Edition keybind
# There are three options this can be set to:
# disabled - the default/fallback, which doesn't apply this workaround
# no-emotes - emotes will NOT be sent to other Bedrock clients and offhand will be swapped. This effectively disables all emotes from being seen.
# emotes-and-offhand - emotes will be sent to Bedrock clients and offhand will be swapped
emote-offhand-workaround: "disabled"
# The default locale if we dont have the one the client requested. Uncomment to not use the default system language.
# default-locale: en_us
# Specify how many days images will be cached to disk to save downloading them from the internet.
# A value of 0 is disabled. (Default: 0)
cache-images: 0
# Allows custom skulls to be displayed. Keeping them enabled may cause a performance decrease on older/weaker devices.
allow-custom-skulls: true
# The maximum number of custom skulls to be displayed per player. Increasing this may decrease performance on weaker devices.
# Setting this to -1 will cause all custom skulls to be displayed regardless of distance or number.
max-visible-custom-skulls: 128
# The radius in blocks around the player in which custom skulls are displayed.
custom-skull-render-distance: 32
# Whether to add any items and blocks which normally does not exist in Bedrock Edition.
# This should only need to be disabled if using a proxy that does not use the "transfer packet" style of server switching.
# If this is disabled, furnace minecart items will be mapped to hopper minecart items.
# Geyser's block, item, and skull mappings systems will also be disabled.
# This option requires a restart of Geyser in order to change its setting.
add-non-bedrock-items: true
# Bedrock prevents building and displaying blocks above Y127 in the Nether.
# This config option works around that by changing the Nether dimension ID to the End ID.
# The main downside to this is that the entire Nether will have the same red fog rather than having different fog for each biome.
above-bedrock-nether-building: false
# Force clients to load all resource packs if there are any.
# If set to false, it allows the user to connect to the server even if they don't
# want to download the resource packs.
force-resource-packs: true
# Allows Xbox achievements to be unlocked.
# THIS DISABLES ALL COMMANDS FROM SUCCESSFULLY RUNNING FOR BEDROCK IN-GAME, as otherwise Bedrock thinks you are cheating.
xbox-achievements-enabled: false
# Whether player IP addresses will be logged by the server.
log-player-ip-addresses: true
# Whether to alert the console and operators that a new Geyser version is available that supports a Bedrock version
# that this Geyser version does not support. It's recommended to keep this option enabled, as many Bedrock platforms
# auto-update.
notify-on-new-bedrock-update: true
# Which item to use to mark unavailable slots in a Bedrock player inventory. Examples of this are the 2x2 crafting grid while in creative,
# or custom inventory menus with sizes different from the usual 3x9. A barrier block is the default item.
unusable-space-block: minecraft:barrier
# bStats is a stat tracker that is entirely anonymous and tracks only basic information
# about Geyser, such as how many people are online, how many servers are using Geyser,
# what OS is being used, etc. You can learn more about bStats here:
#
metrics:
# If metrics should be enabled
enabled: true
# UUID of server, don't change!
uuid: 7dd7d7a6-4e97-4a65-a94a-816589513c9a
# ADVANCED OPTIONS - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING!
# Geyser updates the Scoreboard after every Scoreboard packet, but when Geyser tries to handle
# a lot of scoreboard packets per second can cause serious lag.
# This option allows you to specify after how many Scoreboard packets per seconds
# the Scoreboard updates will be limited to four updates per second.
scoreboard-packet-threshold: 20
# Allow connections from ProxyPass and Waterdog.
# See
enable-proxy-connections: false
# The internet supports a maximum MTU of 1492 but could cause issues with packet fragmentation.
# 1400 is the default.
mtu: 1400
# Whether to connect directly into the Java server without creating a TCP connection.
# This should only be disabled if a plugin that interfaces with packets or the network does not work correctly with Geyser.
# If enabled on plugin versions, the remote address and port sections are ignored
# If disabled on plugin versions, expect performance decrease and latency increase
use-direct-connection: true
# Whether Geyser should attempt to disable compression for Bedrock players. This should be a benefit as there is no need to compress data
# when Java packets aren't being handled over the network.
# This requires use-direct-connection to be true.
disable-compression: true
config-version: 4
# Geyser Configuration File
#
# A bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition.
#
# GitHub:
You must be registered for see links
# Discord:
You must be registered for see links
# Wiki:
You must be registered for see links
#
# NOTICE: See
You must be registered for see links
for the setup guide. Many video tutorials are outdated.# In most cases, especially with server hosting providers, further hosting-specific configuration is required.
# --------------------------------
bedrock:
# The IP address that will listen for connections.
# Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
address: 0.0.0.0
# The port that will listen for connections
port: 25645
# Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
# This option makes the Bedrock port the same as the Java port every time you start the server.
# This option is for the plugin version only.
clone-remote-port: false
# The MOTD that will be broadcasted to Minecraft: Bedrock Edition clients. This is irrelevant if "passthrough-motd" is set to true
# If either of these are empty, the respective string will default to "Geyser"
motd1: "Geyser"
motd2: "Another Geyser server."
# The Server Name that will be sent to Minecraft: Bedrock Edition clients. This is visible in both the pause menu and the settings menu.
server-name: "Geyser"
# How much to compress network traffic to the Bedrock client. The higher the number, the more CPU usage used, but
# the smaller the bandwidth used. Does not have any effect below -1 or above 9. Set to -1 to disable.
compression-level: 6
# The port to broadcast to Bedrock clients with the MOTD that they should use to connect to the server.
# DO NOT uncomment and change this unless Geyser runs on a different internal port than the one that is used to connect.
# broadcast-port: 19132
# Whether to enable PROXY protocol or not for clients. You DO NOT WANT this feature unless you run UDP reverse proxy
# in front of your Geyser instance.
enable-proxy-protocol: false
# A list of allowed PROXY protocol speaking proxy IP addresses/subnets. Only effective when "enable-proxy-protocol" is enabled, and
# should really only be used when you are not able to use a proper firewall (usually true with shared hosting providers etc.).
# Keeping this list empty means there is no IP address whitelist.
# IP addresses, subnets, and links to plain text files are supported.
#proxy-protocol-whitelisted-ips: [ "127.0.0.1", "172.18.0.0/16", "
You must be registered for see links
" ]remote:
# The IP address of the remote (Java Edition) server
# If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
# for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
# Leave as "auto" if floodgate is installed.
address: auto
# The port of the remote (Java Edition) server
# For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
port: 25625
# Authentication type. Can be offline, online, or floodgate (see
You must be registered for see links
).# For plugin versions, it's recommended to keep the `address` field to "auto" so Floodgate support is automatically configured.
# If Floodgate is installed and `address:` is set to "auto", then "auth-type: floodgate" will automatically be used.
auth-type: offline
# Allow for password-based authentication methods through Geyser. Only useful in online mode.
# If this is false, users must authenticate to Microsoft using a code provided by Geyser on their desktop.
allow-password-authentication: true
# Whether to enable PROXY protocol or not while connecting to the server.
# This is useful only when:
# 1) Your server supports PROXY protocol (it probably doesn't)
# 2) You run Velocity or BungeeCord with the option enabled in the proxy's main config.
# IF YOU DON'T KNOW WHAT THIS IS, DON'T TOUCH IT!
use-proxy-protocol: false
# Forward the hostname that the Bedrock client used to connect over to the Java server
# This is designed to be used for forced hosts on proxies
forward-hostname: false
# Floodgate uses encryption to ensure use from authorised sources.
# This should point to the public key generated by Floodgate (BungeeCord, Spigot or Velocity)
# You can ignore this when not using Floodgate.
# If you're using a plugin version of Floodgate on the same server, the key will automatically be picked up from Floodgate.
floodgate-key-file: key.pem
# For online mode authentication type only.
# Stores a list of Bedrock players that should have their Java Edition account saved after login.
# This saves a token that can be reused to authenticate the player later. This does not save emails or passwords,
# but you should still be cautious when adding to this list and giving others access to this Geyser instance's files.
# Removing a name from this list will delete its cached login information on the next Geyser startup.
# The file that tokens will be saved in is in the same folder as this config, named "saved-refresh-tokens.json".
saved-user-logins:
- ThisExampleUsernameShouldBeLongEnoughToNeverBeAnXboxUsername
- ThisOtherExampleUsernameShouldAlsoBeLongEnough
# Specify how many seconds to wait while user authorizes Geyser to access their Microsoft account.
# User is allowed to disconnect from the server during this period.
pending-authentication-timeout: 120
# Bedrock clients can freeze when opening up the command prompt for the first time if given a lot of commands.
# Disabling this will prevent command suggestions from being sent and solve freezing for Bedrock clients.
command-suggestions: true
# The following three options enable "ping passthrough" - the MOTD, player count and/or protocol name gets retrieved from the Java server.
# Relay the MOTD from the remote server to Bedrock players.
passthrough-motd: true
# Relay the player count and max players from the remote server to Bedrock players.
passthrough-player-counts: true
# Enable LEGACY ping passthrough. There is no need to enable this unless your MOTD or player count does not appear properly.
# This option does nothing on standalone.
legacy-ping-passthrough: false
# How often to ping the remote server, in seconds. Only relevant for standalone or legacy ping passthrough.
# Increase if you are getting BrokenPipe errors.
ping-passthrough-interval: 3
# Whether to forward player ping to the server. While enabling this will allow Bedrock players to have more accurate
# ping, it may also cause players to time out more easily.
forward-player-ping: false
# Maximum amount of players that can connect. This is only visual at this time and does not actually limit player count.
max-players: 100
# If debug messages should be sent through console
debug-mode: false
# Allow third party capes to be visible. Currently allowing:
# OptiFine capes, LabyMod capes, 5Zig capes and MinecraftCapes
allow-third-party-capes: false
# Allow third party deadmau5 ears to be visible. Currently allowing:
# MinecraftCapes
allow-third-party-ears: false
# Allow a fake cooldown indicator to be sent. Bedrock players otherwise do not see a cooldown as they still use 1.8 combat.
# Please note: if the cooldown is enabled, some users may see a black box during the cooldown sequence, like below:
#
You must be registered for see links
# This can be disabled by going into Bedrock settings under the accessibility tab and setting "Text Background Opacity" to 0
# This setting can be set to "title", "actionbar" or "false"
show-cooldown: title
# Controls if coordinates are shown to players.
show-coordinates: true
# Whether Bedrock players are blocked from performing their scaffolding-style bridging.
disable-bedrock-scaffolding: false
# If set, when a Bedrock player performs any emote, it will swap the offhand and mainhand items, just like the Java Edition keybind
# There are three options this can be set to:
# disabled - the default/fallback, which doesn't apply this workaround
# no-emotes - emotes will NOT be sent to other Bedrock clients and offhand will be swapped. This effectively disables all emotes from being seen.
# emotes-and-offhand - emotes will be sent to Bedrock clients and offhand will be swapped
emote-offhand-workaround: "disabled"
# The default locale if we dont have the one the client requested. Uncomment to not use the default system language.
# default-locale: en_us
# Specify how many days images will be cached to disk to save downloading them from the internet.
# A value of 0 is disabled. (Default: 0)
cache-images: 0
# Allows custom skulls to be displayed. Keeping them enabled may cause a performance decrease on older/weaker devices.
allow-custom-skulls: true
# The maximum number of custom skulls to be displayed per player. Increasing this may decrease performance on weaker devices.
# Setting this to -1 will cause all custom skulls to be displayed regardless of distance or number.
max-visible-custom-skulls: 128
# The radius in blocks around the player in which custom skulls are displayed.
custom-skull-render-distance: 32
# Whether to add any items and blocks which normally does not exist in Bedrock Edition.
# This should only need to be disabled if using a proxy that does not use the "transfer packet" style of server switching.
# If this is disabled, furnace minecart items will be mapped to hopper minecart items.
# Geyser's block, item, and skull mappings systems will also be disabled.
# This option requires a restart of Geyser in order to change its setting.
add-non-bedrock-items: true
# Bedrock prevents building and displaying blocks above Y127 in the Nether.
# This config option works around that by changing the Nether dimension ID to the End ID.
# The main downside to this is that the entire Nether will have the same red fog rather than having different fog for each biome.
above-bedrock-nether-building: false
# Force clients to load all resource packs if there are any.
# If set to false, it allows the user to connect to the server even if they don't
# want to download the resource packs.
force-resource-packs: true
# Allows Xbox achievements to be unlocked.
# THIS DISABLES ALL COMMANDS FROM SUCCESSFULLY RUNNING FOR BEDROCK IN-GAME, as otherwise Bedrock thinks you are cheating.
xbox-achievements-enabled: false
# Whether player IP addresses will be logged by the server.
log-player-ip-addresses: true
# Whether to alert the console and operators that a new Geyser version is available that supports a Bedrock version
# that this Geyser version does not support. It's recommended to keep this option enabled, as many Bedrock platforms
# auto-update.
notify-on-new-bedrock-update: true
# Which item to use to mark unavailable slots in a Bedrock player inventory. Examples of this are the 2x2 crafting grid while in creative,
# or custom inventory menus with sizes different from the usual 3x9. A barrier block is the default item.
unusable-space-block: minecraft:barrier
# bStats is a stat tracker that is entirely anonymous and tracks only basic information
# about Geyser, such as how many people are online, how many servers are using Geyser,
# what OS is being used, etc. You can learn more about bStats here:
You must be registered for see links
.#
You must be registered for see links
metrics:
# If metrics should be enabled
enabled: true
# UUID of server, don't change!
uuid: 7dd7d7a6-4e97-4a65-a94a-816589513c9a
# ADVANCED OPTIONS - DO NOT TOUCH UNLESS YOU KNOW WHAT YOU ARE DOING!
# Geyser updates the Scoreboard after every Scoreboard packet, but when Geyser tries to handle
# a lot of scoreboard packets per second can cause serious lag.
# This option allows you to specify after how many Scoreboard packets per seconds
# the Scoreboard updates will be limited to four updates per second.
scoreboard-packet-threshold: 20
# Allow connections from ProxyPass and Waterdog.
# See
You must be registered for see links
for assistance - use UDP instead of TCP.enable-proxy-connections: false
# The internet supports a maximum MTU of 1492 but could cause issues with packet fragmentation.
# 1400 is the default.
mtu: 1400
# Whether to connect directly into the Java server without creating a TCP connection.
# This should only be disabled if a plugin that interfaces with packets or the network does not work correctly with Geyser.
# If enabled on plugin versions, the remote address and port sections are ignored
# If disabled on plugin versions, expect performance decrease and latency increase
use-direct-connection: true
# Whether Geyser should attempt to disable compression for Bedrock players. This should be a benefit as there is no need to compress data
# when Java packets aren't being handled over the network.
# This requires use-direct-connection to be true.
disable-compression: true
config-version: 4
# Config version. Do not change this
config-version = "2.7"
# What port should the proxy be bound to? By default, we'll bind to all addresses on port 25577.
bind = "0.0.0.0:25625"
# What should be the MOTD? This gets displayed when the player adds your server to
# their server list. Only MiniMessage format is accepted.
motd = "<#09add3>A Velocity Server"
# What should we display for the maximum number of players? (Velocity does not support a cap
# on the number of players online.)
show-max-players = 500
# Should we authenticate players with Mojang? By default, this is on.
online-mode = false
# Should the proxy enforce the new public key security standard? By default, this is on.
force-key-authentication = false
# If client's ISP/AS sent from this proxy is different from the one from Mojang's
# authentication server, the player is kicked. This disallows some VPN and proxy
# connections but is a weak form of protection.
prevent-client-proxy-connections = false
# Should we forward IP addresses and other data to backend servers?
# Available options:
# - "none": No forwarding will be done. All players will appear to be connecting
# from the proxy and will have offline-mode UUIDs.
# - "legacy": Forward player IPs and UUIDs in a BungeeCord-compatible format. Use this
# if you run servers using Minecraft 1.12 or lower.
# - "bungeeguard": Forward player IPs and UUIDs in a format supported by the BungeeGuard
# plugin. Use this if you run servers using Minecraft 1.12 or lower, and are
# unable to implement network level firewalling (on a shared host).
# - "modern": Forward player IPs and UUIDs as part of the login process using
# Velocity's native forwarding. Only applicable for Minecraft 1.13 or higher.
player-info-forwarding-mode = "modern"
# If you are using modern or BungeeGuard IP forwarding, configure a file that contains a unique secret here.
# The file is expected to be UTF-8 encoded and not empty.
forwarding-secret-file = "forwarding.secret"
# Announce whether or not your server supports Forge. If you run a modded server, we
# suggest turning this on.
#
# If your network runs one modpack consistently, consider using ping-passthrough = "mods"
# instead for a nicer display in the server list.
announce-forge = false
# If enabled (default is false) and the proxy is in online mode, Velocity will kick
# any existing player who is online if a duplicate connection attempt is made.
kick-existing-players = false
# Should Velocity pass server list ping requests to a backend server?
# Available options:
# - "disabled": No pass-through will be done. The velocity.toml and server-icon.png
# will determine the initial server list ping response.
# - "mods": Passes only the mod list from your backend server into the response.
# The first server in your try list (or forced host) with a mod list will be
# used. If no backend servers can be contacted, Velocity won't display any
# mod information.
# - "description": Uses the description and mod list from the backend server. The first
# server in the try (or forced host) list that responds is used for the
# description and mod list.
# - "all": Uses the backend server's response as the proxy response. The Velocity
# configuration is used if no servers could be contacted.
ping-passthrough = "DISABLED"
# If not enabled (default is true) player IP addresses will be replaced by <ip address withheld> in logs
enable-player-address-logging = true
[servers]
# Configure your servers here. Each key represents the server's name, and the value
# represents the IP address of the server to connect to.
lobby = "172.18.0.1:25142"
# In what order we should try servers when a player logs in or is kicked from a server.
try = [
"lobby"
]
[forced-hosts]
# Configure your forced hosts here.
"lobby.example.com" = [
"lobby"
]
[advanced]
# How large a Minecraft packet has to be before we compress it. Setting this to zero will
# compress all packets, and setting it to -1 will disable compression entirely.
compression-threshold = 256
# How much compression should be done (from 0-9). The default is -1, which uses the
# default level of 6.
compression-level = -1
# How fast (in milliseconds) are clients allowed to connect after the last connection? By
# default, this is three seconds. Disable this by setting this to 0.
login-ratelimit = 3000
# Specify a custom timeout for connection timeouts here. The default is five seconds.
connection-timeout = 5000
# Specify a read timeout for connections here. The default is 30 seconds.
read-timeout = 30000
# Enables compatibility with HAProxy's PROXY protocol. If you don't know what this is for, then
# don't enable it.
haproxy-protocol = false
# Enables TCP fast open support on the proxy. Requires the proxy to run on Linux.
tcp-fast-open = false
# Enables BungeeCord plugin messaging channel support on Velocity.
bungee-plugin-message-channel = true
# Shows ping requests to the proxy from clients.
show-ping-requests = false
# By default, Velocity will attempt to gracefully handle situations where the user unexpectedly
# loses connection to the server without an explicit disconnect message by attempting to fall the
# user back, except in the case of read timeouts. BungeeCord will disconnect the user instead. You
# can disable this setting to use the BungeeCord behavior.
failover-on-unexpected-server-disconnect = true
# Declares the proxy commands to 1.13+ clients.
announce-proxy-commands = true
# Enables the logging of commands
log-command-executions = false
# Enables logging of player connections when connecting to the proxy, switching servers
# and disconnecting from the proxy.
log-player-connections = true
# Allows players transferred from other hosts via the
# Transfer packet (Minecraft 1.20.5) to be received.
accepts-transfers = false
[query]
# Whether to enable responding to GameSpy 4 query responses or not.
enabled = false
# If query is enabled, on what port should the query protocol listen on?
port = 25625
# This is the map name that is reported to the query services.
map = "Velocity"
# Whether plugins should be shown in query response by default or not
show-plugins = false
config-version = "2.7"
# What port should the proxy be bound to? By default, we'll bind to all addresses on port 25577.
bind = "0.0.0.0:25625"
# What should be the MOTD? This gets displayed when the player adds your server to
# their server list. Only MiniMessage format is accepted.
motd = "<#09add3>A Velocity Server"
# What should we display for the maximum number of players? (Velocity does not support a cap
# on the number of players online.)
show-max-players = 500
# Should we authenticate players with Mojang? By default, this is on.
online-mode = false
# Should the proxy enforce the new public key security standard? By default, this is on.
force-key-authentication = false
# If client's ISP/AS sent from this proxy is different from the one from Mojang's
# authentication server, the player is kicked. This disallows some VPN and proxy
# connections but is a weak form of protection.
prevent-client-proxy-connections = false
# Should we forward IP addresses and other data to backend servers?
# Available options:
# - "none": No forwarding will be done. All players will appear to be connecting
# from the proxy and will have offline-mode UUIDs.
# - "legacy": Forward player IPs and UUIDs in a BungeeCord-compatible format. Use this
# if you run servers using Minecraft 1.12 or lower.
# - "bungeeguard": Forward player IPs and UUIDs in a format supported by the BungeeGuard
# plugin. Use this if you run servers using Minecraft 1.12 or lower, and are
# unable to implement network level firewalling (on a shared host).
# - "modern": Forward player IPs and UUIDs as part of the login process using
# Velocity's native forwarding. Only applicable for Minecraft 1.13 or higher.
player-info-forwarding-mode = "modern"
# If you are using modern or BungeeGuard IP forwarding, configure a file that contains a unique secret here.
# The file is expected to be UTF-8 encoded and not empty.
forwarding-secret-file = "forwarding.secret"
# Announce whether or not your server supports Forge. If you run a modded server, we
# suggest turning this on.
#
# If your network runs one modpack consistently, consider using ping-passthrough = "mods"
# instead for a nicer display in the server list.
announce-forge = false
# If enabled (default is false) and the proxy is in online mode, Velocity will kick
# any existing player who is online if a duplicate connection attempt is made.
kick-existing-players = false
# Should Velocity pass server list ping requests to a backend server?
# Available options:
# - "disabled": No pass-through will be done. The velocity.toml and server-icon.png
# will determine the initial server list ping response.
# - "mods": Passes only the mod list from your backend server into the response.
# The first server in your try list (or forced host) with a mod list will be
# used. If no backend servers can be contacted, Velocity won't display any
# mod information.
# - "description": Uses the description and mod list from the backend server. The first
# server in the try (or forced host) list that responds is used for the
# description and mod list.
# - "all": Uses the backend server's response as the proxy response. The Velocity
# configuration is used if no servers could be contacted.
ping-passthrough = "DISABLED"
# If not enabled (default is true) player IP addresses will be replaced by <ip address withheld> in logs
enable-player-address-logging = true
[servers]
# Configure your servers here. Each key represents the server's name, and the value
# represents the IP address of the server to connect to.
lobby = "172.18.0.1:25142"
# In what order we should try servers when a player logs in or is kicked from a server.
try = [
"lobby"
]
[forced-hosts]
# Configure your forced hosts here.
"lobby.example.com" = [
"lobby"
]
[advanced]
# How large a Minecraft packet has to be before we compress it. Setting this to zero will
# compress all packets, and setting it to -1 will disable compression entirely.
compression-threshold = 256
# How much compression should be done (from 0-9). The default is -1, which uses the
# default level of 6.
compression-level = -1
# How fast (in milliseconds) are clients allowed to connect after the last connection? By
# default, this is three seconds. Disable this by setting this to 0.
login-ratelimit = 3000
# Specify a custom timeout for connection timeouts here. The default is five seconds.
connection-timeout = 5000
# Specify a read timeout for connections here. The default is 30 seconds.
read-timeout = 30000
# Enables compatibility with HAProxy's PROXY protocol. If you don't know what this is for, then
# don't enable it.
haproxy-protocol = false
# Enables TCP fast open support on the proxy. Requires the proxy to run on Linux.
tcp-fast-open = false
# Enables BungeeCord plugin messaging channel support on Velocity.
bungee-plugin-message-channel = true
# Shows ping requests to the proxy from clients.
show-ping-requests = false
# By default, Velocity will attempt to gracefully handle situations where the user unexpectedly
# loses connection to the server without an explicit disconnect message by attempting to fall the
# user back, except in the case of read timeouts. BungeeCord will disconnect the user instead. You
# can disable this setting to use the BungeeCord behavior.
failover-on-unexpected-server-disconnect = true
# Declares the proxy commands to 1.13+ clients.
announce-proxy-commands = true
# Enables the logging of commands
log-command-executions = false
# Enables logging of player connections when connecting to the proxy, switching servers
# and disconnecting from the proxy.
log-player-connections = true
# Allows players transferred from other hosts via the
# Transfer packet (Minecraft 1.20.5) to be received.
accepts-transfers = false
[query]
# Whether to enable responding to GameSpy 4 query responses or not.
enabled = false
# If query is enabled, on what port should the query protocol listen on?
port = 25625
# This is the map name that is reported to the query services.
map = "Velocity"
# Whether plugins should be shown in query response by default or not
show-plugins = false
Последнее редактирование:
